Repair kit timing chain 'all round carefree package' Opel 3.0i - 24V to 4.0i - 24V

Item number: 636802-s-g


1.049,95 €

including 19% VAT. , plus shipping

Shipping time: 1 - 3 workdays

Zubehör zum Mitbestellen:

+ 12,95 €
+ 54,95 €
+ 28,95 €
+ 57,95 €
+ 64,95 €


Repair kit timing chain Opel 3.0i - 24V to 4.0i - 24V
straight six cylinder, All round - carefree - package

Can we get you anything else?!? Here you will receive everything! All required seals, schaft seal rings, tracks, chains, and, and, and, for the compromise-free revision of our 24V / C30SE (C30XEI, C36GET, C40SE) straight-sixers! The primary focus is naturally the renewal of the timing chain, including the chain guides. Unfortunately, its not that easy, as you basically have to completely deconstruct the engine. And when that part is already lying on the work bench at home anyway, then you might as well renew all the sealing features of the 24V. The engine run and the pavers in your garage will thank you :-)

Please be aware, that we have had the curved guide 90324697, straight guide 90352572 and the sliding block 638153 exclusively made for our 24V drivers! Finally one can revise the 24V engine at a reasonable (financially speaking) expense.

The set on offer here includes the following edelschmiede parts:

  • Timing chain primary (long / large), 6 36 572
  • Timing chain secondary (short / small), 6 36 374
  • Clamping rail timing chain, 6 36 802
  • Guide rail timing chain, 6 36 814
  • Sliding block secondary chain, 6 38 153
  • Seal timing case on engine block left & right, 6 38 253 / 6 38 254
  • Seal end cover on cylinder head, 6 38 255
  • Seal water pump on timing case, 13 34 746
  • Seal ignition distributor on timing case, 12 12 654
  • Shaft seal ring crank shaft front, 6 38 303
  • M7 screw set timing case & water pump
  • Valve cap seal, 6 07 632
  • Set (7 piece) damping rubbers valve cap on cylinder head, 6 07 944
  • Caulking strips spark plug cover on valve cap, 6 07 633
  • Seal thermostat housing on cylinder head, 13 36 575
  • Reinz cylinder head seal, 6 07 973
  • Set cylinder head screws (14 piece / original parts), 6 07 941
  • Shaft seal ring crank shaft rear, 6 14 816
  • Seal oil sump, 6 52 598
  • Seal fuel injection valve strips on cylinder head (2 parts), 8 50 644
  • O-rings (6 piece) fuel injection valve strip on intake manifold, 8 50 638
  • Seal exhaust manifold on cylinder head (2 parts), 8 50 637
  • Seal oil intake manifold on engine block, 6 48 409
  • Set (24 piece) valve shaft seals, 6 42 527
  • Oil filter, 6 50 383

With this set you'll be in the fast lane in your garage, that's a promise!